GOOT WICK Desoldering Wicks Original ESD Safe PCB Solder Wire

High-quantity 100% original GOOT desoldering wick with braided copper wire, saturated with non-chlorine special flux, can be used for precision PCB safely. CP-1015/1515/2015/2515/3015/3515 BGA desoldering wire solder wick except, sucking tin absorption wick wire for the tin absorbing excess solder, sucking tin belt BGA desoldering braid soldering line, trusted brand with world-beating productivity.

Goot CP-1515 BGA Desoldering Braid Soldering Line Sucking Tin Belt For Mobile Phone Motherboard Welding Repair Wire

100% original GOOT WICK desoldering wicks , made in Japan

[ Optional Desoldering Wick ] :

• Option 1: CP-1515 Width: Approx. 1.5mm, 1.5M Length
• Option 2: CP-2015 Width: Approx. 2.0mm, 1.5M Length
• Option 3: CP-2515 Width: Approx. 2.5mm, 1.5M Length
• Option 4: CP-3015 Width: Approx. 3.0mm, 1.5M Length
• Option 5: CP-3515 Width: Approx. 3.5mm, 1.5M Length

Warning :

1. Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
2. To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.

How to Use :

1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove both the desoldering wick and the soldering iron tip from the PCB after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.

Caution :

1. To prevent injury, do not touch the wicks directly while desoldering. Hold the case, or use tweezers, ect.
2. Do not force the tip against the desoldering wick, do not heat for more than 5 seconds to avoid hurting yourself or damaging parts and PCB.

Package includes :

• 1pcs x GOOT WICK Desoldering Wick